NetDial's Status Event Values

What are the values for the possible Status codes ?

Date Entered: 03/04/1998    Last Updated: 06/09/2004

The Status event of NetDial component contains a status code as well as a status description. The following list contains the possible values for these parameters.

Codes
RASCS_OpenPort = 0
RASCS_PortOpened = 1
RASCS_ConnectDevice = 2
RASCS_DeviceConnected = 3
RASCS_AllDevicesConnected = 4
RASCS_Authenticate = 5
RASCS_AuthNotify = 6
RASCS_AuthRetry = 7
RASCS_AuthCallback = 8
RASCS_AuthChangePassword = 9
RASCS_AuthProject = 10
RASCS_AuthLinkSpeed = 11
RASCS_AuthAck = 12
RASCS_ReAuthenticate = 13
RASCS_Authenticated = 14
RASCS_PrepareForCallback = 15
RASCS_WaitForModemReset = 16
RASCS_WaitForCallback = 17
RASCS_Projected = 18
RASCS_StartAuthentication = 19
RASCS_CallbackComplete = 20
RASCS_LogonNetwork = 21
RASCS_Interactive = 0x1000
RASCS_RetryAuthentication = 4097
RASCS_CallbackSetByCaller = 4098
RASCS_PasswordExpired = 4099
RASCS_Connected = 8192
RASCS_Disconnected = 8193

Descriptions
S_RASCS_OpenPort = "Open port"
S_RASCS_PortOpened = "Port opened"
S_RASCS_ConnectDevice = "Connect device"
S_RASCS_DeviceConnected = "Device connected"
S_RASCS_AllDevicesConnected = "All devices connected"
S_RASCS_Authenticate = "Authenticate"
S_RASCS_AuthNotify = "Authenticate: notify"
S_RASCS_AuthRetry = "Authentication: retry"
S_RASCS_AuthCallback = "Authentication: callback"
S_RASCS_AuthChangePassword = "Authentication: change password"
S_RASCS_AuthProject = "Authentication: project"
S_RASCS_AuthLinkSpeed = "Authentication: link speed"
S_RASCS_AuthAck = "Authentication: acknowledge"
S_RASCS_ReAuthenticate = "Reauthentication"
S_RASCS_Authenticated = "Authenticated"
S_RASCS_PrepareForCallback = "Prepare for callback"
S_RASCS_WaitForModemReset = "Wait for modem reset"
S_RASCS_WaitForCallback = "Wait for modem callback"
S_RASCS_Projected = "Projected"
S_RASCS_StartAuthentication = "Start authentication"
S_RASCS_CallbackComplete = "Callback complete"
S_RASCS_LogonNetwork = "Logon network"
S_RASCS_Interactive = "Interactive"
S_RASCS_RetryAuthentication = "Retry authentication"
S_RASCS_CallbackSetByCaller = "Callback set by Caller"
S_RASCS_PasswordExpired = "Password expired"
S_RASCS_Connected = "Connected"
S_RASCS_Disconnected = "Disconnected"


We appreciate your feedback.  If you have any questions, comments, or suggestions about this entry please contact our support team at kb@nsoftware.com.